Availability: | |
---|---|
Quantity: | |
Model | SC-V400 | ||
---|---|---|---|
Temp. Range | RT.+5°C -160°C | ||
Temp. Accuracy | ±0.5℃ (At 40℃); ±1℃ (At 120℃) | ||
Temp. Uniformity | ±0.5℃ | ||
Display Accuracy | 0.1℃ | ||
Time Range | 1-99h59min | ||
Heating Time | ≤15min (From 25℃ to 160℃) | ||
Max Vertical Travel | 150mm | ||
Nitrogen Flow Rate | 15L/min | ||
Nitrogen Pressure | 0.1Mpa | ||
Block Qty | 1 | ||
Max Consumption | 500W | ||
Power Supply | AC220/110V, 50/60Hz | ||
Size (W×D×H)(mm)(Without the Heating Block) | 260x220x475 | ||
Shipping Size(W×D×H)(mm) | 450x440x360 | ||
N.W./G.W. (kg) | 7.3/11 | ||
Optional blocks | |||
Model | Diameter(mm) | Depth(mm) | Capacity |
RC02 027 001 | 10.5 | 50 | 12 |
RC02 027 002 | 12.5 | 50 | 12 |
RC02 027 003 | 13.5 | 50 | 12 |
RC02 027 004 | 15.5 | 50 | 12 |
RC02 027 005 | 16.5 | 50 | 12 |
RC02 027 006 | 19.5 | 50 | 12 |
RC02 027 007 | 20.5 | 50 | 12 |
The visible sample concentrator uses advanced technology to rapidly concentrate samples in a short period of time, saving experimental time. It works by blowing nitrogen into the surface of a heated sample under oxygen-free conditions to accelerate the evaporation and separation of solvents from the sample. The tubes are held in a block and processing multiple samples simultaneously saves time and labor. It helps obtain consistent sample concentration and quality, reducing experiment variability.
Each sample is blown independently to avoid interference or contamination between samples.
Adjustable airflow, different airflow for different samples to achieve the best concentration effect.
Adopting special slotted design block to observe the surface position of concentrated samples
Adopt high-purity aluminium heat conduction medium good heat transfer effect.
Model | SC-V400 | ||
---|---|---|---|
Temp. Range | RT.+5°C -160°C | ||
Temp. Accuracy | ±0.5℃ (At 40℃); ±1℃ (At 120℃) | ||
Temp. Uniformity | ±0.5℃ | ||
Display Accuracy | 0.1℃ | ||
Time Range | 1-99h59min | ||
Heating Time | ≤15min (From 25℃ to 160℃) | ||
Max Vertical Travel | 150mm | ||
Nitrogen Flow Rate | 15L/min | ||
Nitrogen Pressure | 0.1Mpa | ||
Block Qty | 1 | ||
Max Consumption | 500W | ||
Power Supply | AC220/110V, 50/60Hz | ||
Size (W×D×H)(mm)(Without the Heating Block) | 260x220x475 | ||
Shipping Size(W×D×H)(mm) | 450x440x360 | ||
N.W./G.W. (kg) | 7.3/11 | ||
Optional blocks | |||
Model | Diameter(mm) | Depth(mm) | Capacity |
RC02 027 001 | 10.5 | 50 | 12 |
RC02 027 002 | 12.5 | 50 | 12 |
RC02 027 003 | 13.5 | 50 | 12 |
RC02 027 004 | 15.5 | 50 | 12 |
RC02 027 005 | 16.5 | 50 | 12 |
RC02 027 006 | 19.5 | 50 | 12 |
RC02 027 007 | 20.5 | 50 | 12 |
The visible sample concentrator uses advanced technology to rapidly concentrate samples in a short period of time, saving experimental time. It works by blowing nitrogen into the surface of a heated sample under oxygen-free conditions to accelerate the evaporation and separation of solvents from the sample. The tubes are held in a block and processing multiple samples simultaneously saves time and labor. It helps obtain consistent sample concentration and quality, reducing experiment variability.
Each sample is blown independently to avoid interference or contamination between samples.
Adjustable airflow, different airflow for different samples to achieve the best concentration effect.
Adopting special slotted design block to observe the surface position of concentrated samples
Adopt high-purity aluminium heat conduction medium good heat transfer effect.